Buying process

How a mortgage rate lock works

A lock freezes the price of your loan while the paperwork catches up. It protects you only for the loan you described and only until the date on the lock.

Last reviewed 8 min read

+$58

Monthly cost of a quarter-point rate rise on a $340,000 loan

30-year fixed from today’s 7.24% average

Quick answer

A rate lock holds your interest rate, and the points or credits tied to it, until a set date — typically 30, 45 or 60 days — as long as your loan and application don’t change. If you lock after your Loan Estimate, the lender must send a revised one within 3 business days. Without a lock, a move of just a quarter point before closing would add about $58 a month to a $340,000 30-year loan at today’s 7.24% average.

Key facts

30, 45 or 60 days

Typical rate lock periods

CFPB · Oct 28, 2026

3business days

Revised Loan Estimate after you lock

12 CFR 1026.19(e)(3)(iv)(D) · Oct 29, 2026

4business days

Last revised Loan Estimate before closing

12 CFR 1026.19(e)(4)(ii) · Oct 29, 2026

3business days

Closing Disclosure before closing

CFPB · Oct 28, 2026

7.24%

30-year fixed average used here

Freddie Mac Primary Mortgage Market Survey · Week of Oct 29, 2026

What a lock covers — and what it doesn’t

A rate lock is the lender’s promise to honor a specific price for your loan: an interest rate plus any discount points or lender credit that go with it. The CFPB describes it as a rate that won’t change between the offer and closing, provided you close within the lock period and your application stays the same.

That last condition does a lot of work. The lock is priced for a particular loan — amount, down payment, loan type, credit score, property and occupancy. Change any of those and the lender can reprice the loan, lock or no lock. And a lock is only as good as its date: if closing slips past it, you need an extension or a new lock at whatever the market offers that day.

Some lenders lock when they issue the Loan Estimate, some don’t. The top of page 1 says whether the rate is locked and until when; if it isn’t, the CFPB notes, the rate can change at any time. For what drives the rate in the first place, see how mortgage rates work.

Choosing a lock length

The CFPB says locks are typically available for 30, 45 or 60 days, sometimes longer, and that extending one can be expensive. Longer locks protect you for more time but may be priced higher, so ask each lender what its shorter and longer locks cost — the Loan Estimate doesn’t show it.

The lock has to outlast the disclosure clock as well as underwriting, the appraisal and the title work. These are the federal timing rules that sit inside every lock:

Federal timing rules a lock has to fit around
StepRuleWhat it means for the lock
Loan Estimate after applicationWithin 3 business daysA lock offered with it shows on page 1
You say you want to proceedWithin 10 business days, or the lender may revise the estimateLocking early doesn’t stop the clock on this
Lock after the first estimateRevised Loan Estimate within 3 business daysShows the locked rate, points and credits
Changed circumstanceRevised estimate within 3 business days of the lender learning of itA repriced lock arrives this way
Last revised Loan EstimateMust reach you at least 4 business days before closingLate repricing can push the closing date
Earliest closing after the first estimateAt least 7 business days after it is delivered or mailedSets the shortest possible lock you could use
Closing DisclosureAt least 3 business days before closingA new wait starts if the APR rises by more than 0.125%

The disclosure deadlines count business days, while a lock’s length is usually counted in calendar days, so a 30-day lock covers only about four working weeks. If your purchase contract allows a longer closing, size the lock to the contract date plus a cushion.

How the lock shows up on your Loan Estimate

Before you lock, the points and lender credits on your Loan Estimate can still change, because the rules let the lender revise them when the rate is locked. Once you lock, discount points fall under the zero-tolerance category: they can’t go up at closing unless something on the list of valid changed circumstances happens, such as a change you asked for or new information about your credit, income or the property.

If the lender does reprice the lock for a valid reason, it must document it with a revised Loan Estimate within 3 business days. It can’t send a revised Loan Estimate after the Closing Disclosure has been issued; changes after that point appear on a corrected Closing Disclosure instead.

What can change a locked rate

Common reasons a locked loan is repriced
What changesWhy it mattersHow to avoid it
Loan amount or down paymentThe price depends on loan size and loan-to-valueSettle your down payment before you lock
Loan type or termA different product is a different priceChoose the product first, then lock
Appraisal higher or lower than expectedThe loan-to-value ratio movesLeave room in your budget for a low appraisal
Credit scoreA new loan or a missed payment can drop your scoreDon’t open credit or miss payments before closing
Income the lender can’t documentYour debt-to-income ratio changesHand over pay records and explanations early
Job changeLenders re-verify employment close to closing — Fannie Mae within 10 business days of the note dateTell your lender before you change jobs
Closing delayed past the lock dateThe lock expiresLock long enough, and ask about extensions in advance

Lenders also need documents to be current: Fannie Mae requires credit, income, employment and asset documents to be no more than 4 months old on the note date, so a long delay can mean new paperwork as well as a new lock.

What a rate move costs while you wait

In the latest week alone Freddie Mac’s average fell from 7.32% to 7.24% — 0.08 percentage point, worth about $18 a month on this loan. Here is what moves of different sizes would do to a $340,000 30-year fixed loan, starting from today’s 7.24% average:

A $340,000 30-year fixed loan if the rate rises before you lock

Rate rise (percentage points)New ratePrincipal and interestExtra a monthExtra a yearExtra over 5 yearsDTI change on $9,000 a month
+0.1257.37%$2,346+$29+$347+$1,733+0.3 pts
+0.257.49%$2,375+$58+$695+$3,474+0.6 pts
+0.57.74%$2,433+$116+$1,396+$6,982+1.3 pts
+0.757.99%$2,492+$175+$2,104+$10,520+1.9 pts
+18.24%$2,552+$235+$2,818+$14,089+2.6 pts

At today’s rate the payment is $2,317, which is 25.7% of $9,000 in gross monthly income. Every quarter point adds about $58 a month.

Two things follow. First, even small moves add up over a loan’s life, and a lock removes that risk for the weeks before closing. Second, a bigger rise can do more than raise the payment — it can push your debt-to-income ratio over a lender’s limit. If you are near the edge, lock as soon as you have a contract. The affordability calculator shows how much room you have.

Extensions, relocks and float-downs

No federal rule sets what a lender charges for these, so terms vary by lender. Get them in writing when you lock.

  • Extensions. If closing slips, many lenders will extend the lock for a fee or a slightly higher rate. The CFPB warns that extensions can be expensive; ask the price per extra day or week before you choose a lock length.
  • Expired locks. If a lock lapses, the lender may relock you at the current market rate — and some use the worse of the original and current rate. Ask which policy applies.
  • Float-downs. Some lenders sell a one-time option to take a lower rate if the market falls by a set amount before closing. It costs money up front, so it is a bet on rates falling; compare its price with the monthly figures above.
  • Paying for a lower rate. Buying points at lock time is a separate choice; see points or a bigger down payment for when it pays.

When to lock: a checklist

  1. Shop before you lock

    Compare Loan Estimates from several lenders on the same day; credit checks within 45 days count as one inquiry.

  2. Sign the purchase contract

    Most borrowers lock once they have a property and a closing date.

  3. Pick a lock that covers the contract date plus a cushion

    Ask what longer locks and extensions cost.

  4. Get the lock in writing

    Rate, points or credits, the expiration date and the extension policy.

  5. Check the revised Loan Estimate

    It should arrive within 3 business days if you locked after the first one.

  6. Keep your file stable until closing

    No new credit, job changes or large unexplained deposits without telling your lender.

  7. Review the Closing Disclosure

    It arrives at least 3 business days before closing; confirm the rate matches your lock.

CalculatorMortgage payment calculatorPrincipal, interest, taxes, insurance and PMI in one monthly number.Open calculator

Frequently asked questions

How long does a mortgage rate lock last?

Typically 30, 45 or 60 days, according to the CFPB, and sometimes longer. Longer locks can cost more, and extensions can be expensive, so choose a lock that covers your contract’s closing date with some room.

Does locking my rate cost money?

It can. Longer locks may be priced higher, extensions can be expensive and some lenders charge a separate lock fee. The Loan Estimate doesn’t show what other lock periods cost, so the CFPB suggests asking.

Can my rate change after I lock?

Yes, if your application changes — a different loan amount or down payment, a new credit score, an appraisal above or below the estimate, or income the lender can’t document — or if the lock expires before closing.

What happens if my rate lock expires?

You can extend it, usually for a fee or a higher rate, or relock at the current market rate. Some lenders relock at the worse of the old and new rates. Ask about the policy when you lock.

Do I get a new Loan Estimate when I lock?

If the rate wasn’t locked when you got your first Loan Estimate, the lender must send a revised one within 3 business days of the lock, showing the locked rate, points and credits. It must reach you at least 4 business days before closing.

How much does a rate increase cost if I don’t lock?

On a $340,000 30-year loan at today’s 7.24% average, a quarter-point rise adds about $58 a month and a half-point rise about $116 — $1,396 a year.

What is a float-down option?

An option some lenders sell that lets you take a lower rate once if the market falls by a set amount before closing. Terms and costs vary by lender; no federal rule requires or prices it.

Sources

  1. Freddie Mac Primary Mortgage Market Survey — 30-year fixed rate, national weekly average; 30-year fixed rate, previous week (Week of Oct 29, 2026)
  2. CFPB — Typical rate lock periods (Oct 28, 2026)
  3. 12 CFR 1026.19(e)(3)(iv)(D) — Revised Loan Estimate due within this many business days after you lock a rate that was floating; Lender may revise the Loan Estimate if you indicate intent to proceed after more than this many business days; Revised Loan Estimate due within this many business days of learning of a changed circumstance (Oct 29, 2026)
  4. CFPB — Lender must send the Loan Estimate within this many business days of your application (Oct 28, 2026)
  5. CFPB — You receive the Closing Disclosure at least this many business days before closing (Oct 28, 2026)
  6. 12 CFR 1026.22 — APR change that triggers a new 3-business-day wait (regular loans) (Oct 28, 2026)
  7. Fannie Mae Selling Guide B3-3.1-04 — Fannie Mae: employment re-verified no more than this many business days before the note date (Oct 7, 2026)
  8. Fannie Mae Selling Guide B1-1-03 — Fannie Mae: credit, income, employment and asset documents may be no older than this on the note date (Apr 2, 2025)
  9. CFPB — Mortgage credit checks within this window count as one inquiry (Aug 28, 2026)
  10. CFPB: Loan Estimate explainer

Last reviewed Figures are checked against the sources above. Read our editorial policy. This page is general information, not financial advice — see the disclaimer.

On this page

  1. Quick answer
  2. Key facts
  3. What a lock covers — and what it doesn’t
  4. Choosing a lock length
  5. How the lock shows up on your Loan Estimate
  6. What can change a locked rate
  7. What a rate move costs while you wait
  8. Extensions, relocks and float-downs
  9. When to lock: a checklist
  10. FAQ
  11. Sources

↑↓ to move · Enter to open